PowerBoost DC Converter System 1.5: Quick Start Guide
16995-01 rev. D
This document contains proprietary information. No part of this document should be reproduced
or distributed beyond its intended recipients without the express written consent of JMA Wireless. 37
Place checks in the checkboxes for the channels desired to activate. See example image
below: channels 1, 2, 4, 5, 7, 8 have been selected.
(Note: it is not necessary to use all channels in sequence. In this example, channels 3, 6,
9, 10 have not been enabled, as if the system design has left those channels and OVP
positions unloaded for future build-out).
To Next Page
Loading...
Need help?
General