Table 13: CVM03050 Controller accessories (order separately)
Product code number Description
ACC-TBKPWFCSA-0
Power, FC Bus, and SA Bus terminal block replacement kit for SNC, CGM, CVM, and
XPM products. Kit includes 5 of each terminal block type. 15 terminal blocks in
total.
ACC-TBKINOUT-0
Input and Output terminal block replacement kit for SNC, CGM, CVM and XPM
products. Kit includes 5 of each 2, 3, and 4 position Input and Output terminal
blocks. 30 terminal blocks in total.
MS-FIT100-0
The Field Inspection Tool (FIT) is a portable handheld device with a user interface
that is used to test and troubleshoot the BACnet protocol MS/TP RS-485
communications bus that connects supervisory controllers and equipment
controllers to field point interfaces.
The FIT can be used to check out the wiring of the MS/TP RS-485 bus as well
as verify proper communications of supervisory controllers and equipment
controllers connected to the bus. The FIT can be used on both the FC Bus and SA
Bus.
F4-CV Series VAV Terminal Equipment Controllers Installation Guide20
To Next Page
Loading...
