SM-18003
6-7
FIELD WORK INSTRUCTIONS
P Compressor Condition Indication (Reference)
Comp. Current P1 qF
Accumulated Operation Time of
Comp.
P2 - -
Q Sensor Condition Indication
Motion Sensor Response Rate q1 - -
Radiation Sensor Temp. q2 - -
Motion Sensor1 Response Rate q3 - -
Motion Sensor2 Response Rate q4 - -
Motion Sensor3 Response Rate q5 - -
Motion Sensor4 Response Rate q6 - -
Setting Temp. Collected Value q7 - -
Client: Result
Installation Date:
System No.:
Date Checked:
Checked by:
NOTE:
Refer to Section 3.1.4 “Checking Wired Controller” for items of check mode.