Johnson JET7000 - Running Belt;Deck;Roller Replacement

RUNNING BELT/DECK/ROLLER REPLACEMENT
Tools required:
ü Philips screwdriver
ü T-handle key
(8mm,5mm)
Procedure:
1. Remove the screws
from the front cover
by using the
screwdriver.
2. Remove two rear
covers from the end of
the side rails.
3. Pull out the two
side rails.
4. Elevate the
machine to a proper
height for removing
the front roller.
7-1 Revision: 1.0 Date: 2001-06-01