Johnson JET7000 - Clean the Grooves Procedure

CLEAN THE GROOVES PROCEDURE
Frequency:
Every 3 months.
Procedure:
1
Remove the drive
belt and check the
grooves in belt for
dirt or dust and clean
it.
2 Check the
grooves in motor
pulley for dirt or dust
and clean it.
3 Check the
grooves in roller
pulley for dirt or dust
and clean it.
If dirty grooves in the drive belt, motor and roller pulley, there will
be noises while running.
1-4 Revision: 1.0 Date: 2001-06-01