Revision: 1.0 Date: 1999-09-01
MCB LED Status Report
Product Type :............................... Serial
Number :........................
When power-up the treadmill the MCB LED status is :
AC(*115V)Light 18V Light 11(*12)V Light
LED On : LED On : LED On :
LED Off : LED Off : LED Off :
MTR Light I-Limit Light PMW Light
LED On : LED On : LED blinking:
LED Off : LED Off:
LED Dim: LED Off :
ILT1 Light (JET7000) ILT2 Light (JET7000)
LED On : LED On :
LED Off: LED Off :
When you press the UP or DOWN key, the LED status is :
Up Light Dn Light
LED On : LED On :
LED Off: LED Off :
*These LEDs are only for JET-7000 MCB
In order to fill-out this Report properly please use the PWM MCB CHART and MCB
LED-aided troubleshooting which you can find in the Service Manual.
Please fill-out this Report at the moment before repairing the problem.
Serial number * MCB : ....................................... Reported
by : ...............................
Approximate hours of use : .......................................... Company
Name : ................................
To Next Page
Loading...
