Jonsered CS 2236 T - English; Table of Contents; Contents

CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols on the machine: ..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents ............................................................... 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what on the chain sa w? ........................... 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 6
Personal protective equipment ............................. 7
Machine ′ s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL Y
Fitting the bar and chain ....................................... 16
FUEL HANDLING
Fuel ...................................................................... 17
Fueling .................................................................. 18
Fuel safety ............................................................ 18
ST ARTING AND STOPPING
Star ting and stopping ........................................... 19
W ORKING TECHNIQUES
Bef ore use: ........................................................... 21
General working instructions ................................ 21
How to avoid kickback .......................................... 28
MAINTENANCE
Gener al ................................................................. 29
Carburettor adjustment ......................................... 29
Checking, maintaining and servicing chain saw
safety equipment ..................................................
30
Muffler .................................................................. 32
Starter housing ..................................................... 33
Air filter ................................................................. 34
Spark plug ............................................................ 34
Lubricating the bar tip sprocket ............................ 35
Adjustment of the oil pump. .................................. 35
Cooling system ..................................................... 35
Maintenance schedule ......................................... 36
TECHNICAL D ATA
T echnical data ...................................................... 37
Guide bar and saw chain combinations ............... 38
Saw chain filing and file gauges ........................... 38
EC Declaration of Conformity ............................... 38
J1156456-26,CS2236T,GB,d1.fm Page 3 Friday, January 24, 2014 11:57 AM