3 Using the EF-S system
The EF-S system is turned on when the ignition key is placed in the ignition position. First,
thetractor unit’s EBS system is activated. This system then turns on both the EF-S system
and the battery charger. The remote control is turned on via the accessory position and
starts automatically. Various messages are displayed on the remote control’s screen.
NEVERdrivewithanarticulatedvehiclewhoseEF-Ssystemhasnot
beenpressurized!
After the button is pressed, the angular rotation of the wheels of the trailer/semi-trailer
is changed, if necessary, to match the angular rotation of the tractor unit with regard to the
trailer/semi-trailer.
If you forget to press button , the EF-S system’s operating system is started automatically
as soon as the vehicle’s speed exceeds 2 km/h or if the tractor unit is at an angle to the trail-
er/semi-trailer.
Beforepressingthe button,makesuretherearenopeopleor
animalsnearthewheelsbecausethereisariskofbecoming
trapped!
Part no.: 162014 EN-1
33
Release 07/2020
User manual 2300 EF-S system
To Next Page
Loading...
