4.2 Information messages
The information messages explained in this section provide information about the processes
that are performed and the status of these processes, i.e. whether the processes are active
or have been completed.
Code: 01190
Message: Calibration successful
Description:
Thismessageis displayed after theEF-Ssystemhas been cal-
ibrated successfully.
Colour: Green
Information messages
Code: 01200
Message: Centring activated
Description:
Thismessageis displayed when thewheelsofthetrailer/semi-
trailerarerotated to thestraight-ahead position bytheEF-Ssys-
tem.
Colour: White
Information messages
Code: 01210
Message: Steering activated
Description:
Thismessageis displayed after the“Automatic steering” function
has been activated on theremotecontrol(see“Automatic steer-
ing” on page1)
Colour: Green
Information messages
Code: 01220
Description: Pressurereleaseactive
Solution:
Thismessageis displayed after the“Releasepressure” function
has been activated in theserviceprogram (see"Systempressure"
on page1)..
Tabel-2 Information messages
Code: 01230
Message: Calibration activated
Description:
Thismessageis displayed after the“Zero” function has been activ-
ated on theremotecontrol(zie"Calibrating" on page 49).
Part no.: 162014 EN-1
57
Release 07/2020
User manual 2300 EF-S system
To Next Page
Loading...
