3.4 To the straight-ahead position (centring)
Carry out the following procedure after the steering angle of the EF-S system has been manu-
ally altered or when steering is not desired. The wheels turn back to the straight-ahead pos-
ition.
Procedure
1. Follow the procedure given below.
Thewheels automaticallymoveback to thestraight-ahead position afterthe
button is pressed.It isnot necessaryto keep thebutton pressed!
Part no.: 162014 EN-1
39
Release 07/2020
User manual 2300 EF-S system
To Next Page
Loading...
