JR Racing R-1 - System Mode 1

10
System Mode
Also called System Set-Up Mode, this mode con-
tains programming features that are usually only
adjusted once during the initial set-up of a particu-
lar car, and once set, they’re seldom, if ever,
changed at the track. System Mode programming
features include servo reversing, model name,
modulation type, data transfer, etc.
Note: When in a function, press the UP and DOWN keys
simultaneously to return to Normal display.
To enter the System Mode,
press and hold the MODE
LIST key, then turn on the
transmtter. Press the
MODELIST key again to
enter the select menu
Use the UP key to
scroll up through the
menu
Use the DOWNkey to
scroll down through
the menu
Normal Display
Reverse Switches
✔ Function Select
✔ Trim Rate
Model Name
Model Reset
Modulation Select
Fail-Safe (PCM only)
Data Transfer
✔ Programmable Mix 1
✔ Programmable Mix 2
Transmitter Mode
Note: Functions marked with a ✔ do not appear on the
screen when the transmitter is in Beginner Mode.