35
Idle Up
The idle up function is normally used to advance the throttle
position slightly, making it easier to start gas cars. When
turned on, the throttle servo will offset to the pre-
programmed position, and “on” will appear on the right side
of the idle up screen.
In Function Mode, access the Idle Up function by moving
the cursor to IDLE UP and pressing the MODE LIST key.
[IDLE UP]
THRO ON
F 5
Press the MODE LISTkey to
return to Direct Mode
Idle Up position:
F = Forward
B = Brake
Indicates throttle Idle Up
postion
Indicates Idle Up is on
Press the CLR key to
reset to inhibit
Press the DOWN key to go
to Quick Throttle
Press the UP key to go
to A.B.S. braking
Press the + or – keys adjust the
idle up position
To Next Page
Loading...
