Transfer
The R-1 allows the memory of a model to be transferred
from one R-1 to another. A JR trainer cord (part #JRPA130)
is needed to complete the transfer.
In System Mode, access the Transfer function by moving the
cursor to TRANSFER and pressing the MODE LIST key.
[TRANSFER]
£TRANSMIT
MODEL 1
Connent DSC
& POWER OFF
With the power off, press and hold the MODE LIST key while
plugging the trainer cord in the DSC jack. Do this with both
transmitters. Select the transfer screen on both R-1s.
Press the PAGE key to select
the transmit or receive screen
To Next Page
Loading...
