17
Model Name
The model name function allows the storing of a model’s
name using up to eight characters. This is important for
future identifications purposes in selecting a model. Some
racers like to store the channel number as well as a
reminder; for example, Vector 65.
In System Mode, access the Model Name function by
moving the cursor to MDL Name and pressing the MODE
LIST key.
[MDL Name]
MODEL 1
SPCM < >
§
Press the SEL key to
move the cursor right
one step
Press the UP key to go to
Trim Rate
Indicates selected model
Press the DOWN key to
go to Data Reset
Press the CLR key to
remove a letter above
the
Press the + or – keys to
select the desired
number, letter, or space
To Next Page
Loading...
