41
Press the PAGE key to alternate
between these two screens
Position (Digital Trim
and Servo Position)
The POS. screens visually display the digital trim positions
and the servo positions. This can be helpful when making
adjustments or to see how programming changes (e.g.,
mixing or throttle curve) affect the servo’s movement.
In Function Mode, access the Position function by moving
the cursor to POS. and pressing the MODE LIST key.
[POS.]
£D.T.
0 TH.TR
0 ST.TR
0 AUX
100% BRAKE
100% S.D/R
[POS.]
£Servo
ST.
THRO
AUX.
The cursor indicates the
position of the trim
The cursor indicates the
servo position
Press the PAGE key to
alternate between the above
two screens
Press the DOWN key to go
to Dual Rate/Expo
Press the UP key to go
to Model Select
To Next Page
Loading...
