24
Programmable Mix 1 and 2
The R-1 offers two programmable mixes that can be used to
mix any two channels together. The mixing value can be
adjusted independently in either direction, plus the switch
can be selected to turn on/off the mixing. Both mixes work
identically.
[PROG.Mix1]
INH
[PROG.Mix1]
£THRO∞THRO
Rate: 0%
0%
SW: ON
Offset
0
Indicates channels mixed
Master channel
Switch position selected:
ON
D. MODE
Idle Up
Push B
Slave channel
Mix values
Offset value
Press the DOWN key to
go to Tx Mode
In System Mode, access Programmable Mixing by moving
the cursor to PROG.MIX and pressing the MODE LIST key.
Press the PAGE key to move
the cursor
Press the UP key to go to
Transfer
Press the + or – keys to
select the channel or
change the mix values or
to select the switch
position
Press the CLR key to reset
the selected function to the
factory reset value
To Next Page
Loading...
