17
4 Setting the [End of track limit].
Specify the time remaining to reach the destination so as to generate an alert for approaching to
the proximity of the final destination in a range between 1.0 and 5.0 min.
2.3 Setting up the Course difference warning
1 Click on the [Menu] button on the left tool bar.
2 Click on [Alert] - [Track Control] on the menu.
3 Setting the [Course difference limit].
Specify the difference between the planned course and own ship's bearing in angle, within a
range between 0.5 and 45.0°.
2.4 Setting up the Cross Track Alarm
1 Start Route Monitoring.
2 The alert sounds when the own ship deviates from the planning course.
When Cross Track Alarm occurs, adjust the course of the own ship.
Or, edit a plan route.
To Next Page
Loading...
Need help?
General
