JRC JCY-1800 - JCY-1850 Configuration

1. Specifications
JCY-1800/1850 VDR/S-VDR Installation Guide
6
DOC No. 7ZPJD0387C
2) Options configuration of the equipment
No. Name of Optional Component Type Name Function
1 Microphone Unit NVT-161
y To use an “Exposed” type, remove the flange of “Built in
the ceiling” one.
y Maximum nine sets of microphones can be installed,
inclusive of standard configuration.
2 Waterproof Microphone Unit NVT-162
y Records the conversation in the wing and outputs into the
Recording Control Unit.
y Maximum nine sets of microphones can be installed,
inclusive of standard configuration and NVT-161 type.
3
NSK interface board CHM-378
y Optional interface board for heading in synchro or step
signal and ship’s speed by pulse.
y Installed in the NDV-1800.
4
Digital Signal Converter
(64CH)
NCT-72
y Outputs IEC61162-1 data converted from 64 dry contacts.
y Outputs IEC61162-1 data converted from 8 analog signals
by adding the optional CEF-60.
5
Digital Signal Converter
(16CH)
NCT-63
y Outputs IEC61162-1 data converted from 16 dry contacts.
y Outputs IEC61162-1 data converted from 8 analog signals
by adding the optional CEF-60.
6 Analog signal Converting
Board
CEF-60
y Converts eight analog signals to IEC61162-1 data.
y Installed in the NCT-72/63
7 Radar Interface Unit NWP-46
y Required when connecting the radar of UXGA display.
Accessories
8
Spare Parts for the DSC 7ZXJD0092
y Spares for the NCT-72/63
y Fuse
9
Spare Parts for the RIF 7ZXJD0093
y Spares for the NWP-46
y Fan, Fuse
1.5. JCY-1850 Configuration
1) Standard configuration of the equipment
No. Name of Component Type Name Qty Function
1 Protective Capsule Unit NDH-317 1
y Records data on the recording medium in the
recovery Protective Capsule.
y At the time of sinking, the underwater acoustic
beacon operates to detect the position of the
Protective Capsule Unit.
2 Connection Box NQE-3163 1
y Connects the Protective Capsule Unit and the
Recording Control Unit with a power supply
cable and a LAN cable.
3 Recording Control Unit NDV-1850 1
y Outputs the recorded data to the Protective
Capsule Unit and the CF CARD.
y Inputs radar images, audio data and
IEC61162-1/-2 data.
y Monitors and controls the conditions of the
system.
y Frame Grabber Board (FGB) for recording
Radar images is an option, FGB is not a
standard component.
3-1 Data Processor Unit NDL-46 1
y Main control processing part with a built-in
backup CF CARD.
3-2 Audio Junction Board CQD-2041 1
y Audio I/F to relay the MIC and VHF signals.
3-3 Power Supply Unit NBL-327 1
y Power supply equipped with a secondary battery
and a charging circuit.
3-4 NSK interface board CHM-378 1
y Interface board for heading in synchro or step
signal and ship’s speed by pulse.
4 Operation Panel Unit NCG-169 1
y Displays the status of S-VDR.
ALARM BUZZER, an ALARM ACK SWITCH,
and LEDs are equipped.