2. Maintenance Software starting
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4
DOC No. 7ZPNA4014
2.1.2.1. Selecting setup system (“Setup Equipment”)
Select a setup system from VDR, S-VDR or RMS.
2.1.2.2. Entering Worker, Company and Password (“Register Information”)
1) Register Information
Enter the worker information, which will be recorded onto the VDR/S-VDR.
• Worker name
• Company name
2) Password
Enter a password, it is indicated with “*”.
The password for field engineer is "jrcvdr" in a small letter.
2.1.2.3. Selecting Ethernet adapter
The Maintenance software will detect an Ethernet adapter in a PC automatically.
When the PC has more than one Ethernet adapter, select the adapter interface for connecting to the VDR/S-VDR
with wired LAN.
Many of recent laptop PC has not only wire LAN but also a wireless LAN.
Select the adapter for the wired LAN.
2.1.2.4. Adding IP address for VDR/S-VDR
Check the IP address and the Subnet mask which are registered to Ethernet adapter.
The IP address for VDR/S-VDR maintenance is added. (192.168.110.200)
The IP address added for VDR/S-VDR maintenance is deleted by shutting the maintenance
software.
2.1.2.5. Login
Click the [Next] button.
When succeeding to login to the VDR/S-VDR, “HOME screen” will appear.
To Next Page
Loading...
