7. Real time Monitor (Menu)
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
99
DOC No. 7ZPNA4014
7.2.1.2. Selecting the monitor data type
Click the radio button of data type (“RCV data”/”REC data”) to monitor.
● “RCV data”: Monitors all receiving data from selected channel.
The sentence data which is not recorded by the VDR/S-VDR is also displayed.
● “REC data”: Monitors the sentence data which is recorded by the VDR/S-VDR.
The sentence which is not recorded is not displayed even if it has received.
The monitor data is displayed by the sentence format currently recorded in the VDR/S-VDR.
“RCV data” monitor
It is used when the DAU begins receiving NG.
When wiring is reverse-connected, the data which carried out character transformation is displayed.
7.2.2. Monitor start and stop
1) Monitor start
Click the [START] button.
The monitoring channel indicator becomes Green.
2) Monitor stop
Click the [STOP] button.
The monitoring channel indicator returns Gray.
● “REC data”
The addition and deletion of the CH to the monitor can be operated freely.
● “RCV data”
Only independent CH can be monitored.
7.2.3. Monitor pause
1) Pause
Click the [Pause] button.
2) Restart
The [Pause] button is changed to the [PLAY] button during the pausing. Click the [PLAY] button.
To Next Page
Loading...
