11. Frame Grabber Board (CKA-137) setup - FGB utility -
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
130
DOC No. 7ZPNA4014
11.3.3.1. Sampling Phase tuning
If the captured image out of focus, tune the sampling phase. Normally, do the Phase AUTO turning. Phase AUTO
tuning execute on still image, so stop the Radar transmit.
a) Click the [Tuning (T)] -> [Phase AUTO] menu.
The following message appears.
b) Click the [OK] button on message box.
Phase AUTO tuning start, and 35 images captured for tuning. During the tuning, tuning process display on the left
bellow status bar. End the tuning, the result message appears.
c) click the [No (N)] button on message box.
To Next Page
Loading...
