4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
62
DOC No. 7ZPNA4014
4.7.3.3. Checking setup data
Confirm that there is no blank in setting data.
1) Entry lamp
Defect in setting entry (Model, Serial number, etc.) as warning can be displayed to the
“Entry” lamp.
● (Green): All entries are inputted.
● (Yellow): The blank entry remains.
Look for a blank entry and input a setup data to blank entry.
2) Audio Quality lamp
Result of judgment to audio quality is displayed to the “Audio Quality” lamp.
● (Yellow): An audio quality is not judged.
Open the "Audio quality check" screen and enter a result
of judgment.
● (Green): A result of judgment for audio quality is good.
● (Red): A result of judgment for audio quality is no good.
4.7.3.4. Transmitting setup data
Transmit the setup data to the RCU.
• Transmit
Click the [SET] button.
• Cancel
Click the [Close] button.
To Next Page
Loading...
