Chapter 4 Operation Method
73
2. Tap the [PROTECT] button. The DATA PROTECT screen is displayed.
3. Set the date and time when the accident occurred.
Using four buttons shown in Table 4-26, set the cursor center to the date and time when the
accident occurred. As center on the cursor, the recorded data is preserved from three hours
before to three hours after. The recorded data is preserved a total of six hours.
[Information]
Even if the recorded data preserved within three hours after the occurrence of the accident, the
recorded data is preserved from the occurrence of the accident to three hours later.
Figure 4-62 Set cursor center to accident time
Set the cursor center to the
date and time when the
accident has occurred.
Figure 4-61 DATA PROTECT screen
SAVE screen
DATA PROTECT screen
To Next Page
Loading...
