Chapter 4 Operation Method
74
Table 4-26 The button to set the date and time
Button Function
Sets one day before.
Sets one day after.
Sets one hour before.
Sets one hour after.
4. Tapping the [Select] button, then the drop-down list is displayed. Select the destination save
area to save the preserved data.
[Information]
The number of the save area is up to 3.
If the save area has no space, see “4.9.3 Releasing the preserved data” and release the
unnecessary preserved data.
5. Tapping the [Protect] button, then the chosen recorded data is preserved.
Figure 4-64 [Protect] button
Figure 4-63 Select save area
Preserved data
(up to 3 data)
To Next Page
Loading...
