JRC JLR-7600 - User Setting Screen Display (MID); Resetting a TRIP (LOG); Changing a Unit of the Vessel Speed (LOG)

4-9
4.1.14 User setting screen display (MID)
From among the screens registered in the display screen, the user-set screen can be displayed.
The user-set screen can also be displayed quickly from other screen by registering the most
often-used screen.
The user-set screen cannot be registered in each use mode.
Press the key.
To return to the original screen, press the key.
Example) The DISPLAY4 is set in the user setting screen.
4.1.15 Resetting a TRIP (LOG)
A trip value can be reset. A total travel distance cannot be reset.
Press for 1 second.
The TRIP screen is reset to 0.00NM.
4.1.16 Changing a unit of the vessel speed (LOG)
The unit of the vessel speed can be switched between kn and m/s.
Press .
Whenever the key is pressed, the setting switches between kn and m/s.
画面 4
(D4)
画面 1
(D1)
画面 5
(D5)
画面 6
(D6)
画面 3
(D3)
画面 2
(D2)
CLR
Display1
Display2
Display3
Display4
Display5
Display6