4-10
4.1.17 Registering the Own ship's position (GPS)
The own ship's position can be registered to the waypoint list.
Press the key.
4.1.18 MOB (GPS)
・The MOB (Man Overboard) function is used to save the position at which a person or object has
fallen overboard. This function allows rapid return to that position.
・The MOB function is valid on all screens.
・If MOB is performed, a MOB mark will be displayed on a Man Overboard position and the route
which made the Man Overboard position the destination will be performed. The bearing and
distance to the Man Overboard position from a current position are displayed on BRG and DTG.
1. Press and hold down the
key for 3 seconds or more.
The following pop-up will be displayed, and the MOB function performed.
To stop the MOB function, press and hold down the
key for 3 seconds or more.
MOB is registered as waypoint number 000 in the waypoint list.
4.1.19 Selecting a Waypoint/Route with the GOTO Key (GPS)
・If a waypoint or route is selected with the GOTO key, navigation starts to that waypoint.
・The waypoint can be selected by the following methods.
(1) Set HOME PORT as the waypoint.
(2) Enter the waypoint number.
(3) Enter the route number.
(4) Set the cursor position as the waypoint
(5) Select from each list (waypoint list and route list).
GOTO
GOTO menu screen
Press the
key and select the waypoint from the GOTO menu screen.
SAVE DATA
No.000
Supplement
To Next Page
Loading...
