JRC JLR-7600 - Page 62

4-32
Main menu
Explanation Default
Sub-menu1
Sub-menu2
Sub-menu3
12> DEMO MODE
DEMO TYPE Select the action of demonstration.
【STATIC, STRAIGHT, RIGHT, LEFT, ROUTE, AUTO】
-
DATE
Start day of demonstration. -
TIME
Start time of demonstration. -
LATITUDE
Start position (Lat) of demonstration. -
LONGITUDE
Start position (Lon) of demonstration. -
DEMO MODE To start demonstration, set to "START".
To end demonstration, set to "END".
・
During execution of demonstration, [S] is displayed
in blinking mode at the bottom of the screen.
-
13> SOFT UPDATE
DISPLAY
Display program update. -
SENSOR
Sensor program update.
－
14> MAIN/SUB
Selects a type
【MAIN, SUB】
MAIN
15> RECEIVER No.
Selects a sensor number.
【1, 2】
1
16> DISPLAY TYPE
Setting a model. GPS
・When the model is set, the setting contents are
initialized.
17> RS-485ID
To identify a display unit on the RS-485 network, set
an ID for each display unit.
Avoid duplication of ID among the display units.
【 1～10 】 １
18> DIMMER GROUP
Dimmer control linkage is available for the display
units that are connected by the RS-485 network.
・The display of same dimmer group number can be
linked.
【 1～10 】 １
19> DIMMER
Selecting a dimmer unit.
【Key(DIM key), EXT DIMMER(External dimmer unit)】
Key