JRC JLR-7600 - Page 61

4-31
Main menu
Explanation Default
Sub-menu1
Sub-menu2
Sub-menu3
10> MAINTENANCE
INPUT DATA
Data that is received from the serial port can be
displayed on a screen.
・Display format(ASCII/BINARY) can be selected.
-
DIAGNOSIS
DISPALY DIAG
Self-diagnosis of ROM, RAM, and serial port can be
performed
-
SENSOR DIAG
Self-diagnosis of sensor can be performed.
-
MONITOR TEST
Self-diagnosis of LCD can be performed.
-
BUZZER TEST
Self-diagnosis of buzzer sound can be performed.
-
ERROR LOG
Up to 40 past alarms can be stored and when the
number of alarms exceeds 40, alarms are deleted
from the oldest one.
ALARM
The current alarm is displayed.
-
ERROR LOG The past alarm is displayed. -
SOFT VERSION -
DISPLAY VER -
APP VER
The software version of the display unit can be
displayed.
-
SERIAL NUMBER
The serial number of the display unit can be
displayed.
-
BARCODE
The bar code number of the display unit can be
displayed.
-
SENSOR VERSION -
APP VER
The software version of the sensor unit can be
displayed.
-
SERIAL NUMBER
The serial number of the sensor unit can be
displayed.
-
BARCODE
The bar code number of the sensor unit can be
displayed.
-
11> MASTER RESET
DISPLAY RESET
Reset of entire display unit.
-
DISPLAY
Reset of entire display unit. (Include waypoint list
and route list)
－
EXCEPT FOR LIST
Reset of entire display unit. (Except waypoint list
and route list)
－
RECEIVER RESET
Reset of sensor unit.
-
ALL RESET
Reset of sensor unit and display unit. (Include
waypoint list and route list)
-