JRC JMR-7230-S - Work Flowchart While Sailing

Section 8 Functions of the ECDIS (Option) 8-2
8.1.1 Work Flowchart While Sailing
Sailing start
Display the "Route
Monitoring" dialog box
Select [Route]
Select a waypoint
Move own ship to the
waypoint
Route monitoring
("Arrived at WPT" alert is
activated when arrived at
the WPT.)
Select “UNLOAD” from
“Route” and finish route
monitoring.
Click [Route Monitoring] on the menu.
End of sailing
When the ship arrives at the WPT, an
"Arrived at WPT" alert is activated and the
next WPT is updated.
After confirming the alert, click on the
[ALERT ACK]
(alert acknowledgment)
button and stop the alert.
Select the route to be used. (Initially, UNLOAD is being displayed.)
Select a waypoint from [To WPT].
Navigate own ship along the route.
Own ship's symbol
TO WPT