JRC JMR-7230-S - Using the Cursor

6-25 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
6.5.2.2 Using the cursor
1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click [Alert] - [New Target Alarm] on the menu.
The [New Target Alarm] dialog is displayed.
3 Select AZ ([Use AZ1] or [Use AZ2]) to be set.
4 Click at the start angle position.
The start angle is set.
5 Move the cursor and click at the end angle position.
The line connecting the start angle and end angle appears.
6 Move the cursor and click at the start distance position.
An arc appears at the start distance position.
7 Move the cursor and click at the end distance position.
Auto acquisition/activation zone (AZ) with the shape of sector enclosed by start angle, end
angle, start distance and end distance is created.