JRC JMR-7230-S - Highlighted Display

14-67 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Creating an object with EBL/VRM operation
1 Click on the [EBL/VRM] button on the drawing toolbar.
The cursor changes to the EBL/VRM reference point cursor. (Refer to "14.2.5 Creating an
object in the EBL/VRM mode").
2 Click on the position of the reference point of the EBL/VRM marker.
The EBL/VRM marker is displayed.
3 Place the EBL/VRM marker on the position on which an object is to be created and
click the button.
An object is created on the position on which the button was clicked and the property
information reflected in the object property dialog box. (Refer to "14.2.8 Object property dialog
box").
4 Adjust the parameters on the object property dialog box.
5 To create an object on another position continuously, repeat Steps 2 to 4.
14.5.8.4 Highlighted display
Highlighted display can be set by creating an area of a polygon on a chart. Use highlighted display for
attaching a comment on the chart or so on.
1 Click on the [Type] button on the drawing toolbar.
An icon list is opened.
Select an icon of highlighted display. (Refer to "14.2.3 Selecting an object type").
Highlighted
display