JRC JMR-7230-S - Enhancing Targets

5-21 Section 5 Basic Operation of the Radar
1
2
3
4
5
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
5.4.3 Enhancing targets
This function enlarges the display sizes of images to enhance targets.
1 Click on the RADAR Signal Processing Setting button in Radar system information.
The [RADAR Process] dialog box appears.
2 Select the target enhancement level from the list in [Target Enhance].
Setting items Functions and effects
Recommended use
condition
[ENH Off] Sets the target enhancement function to OFF. Set this function to Off when
resolution is particularly
necessary.
[ENH Level1] Enhances the radar echo by 1 level in the vertical
and horizontal directions of the screen.
Normal navigation
[ENH Level2] Enhances the radar echo by 2 levels in the vertical
and horizontal directions of the screen.
Enhance the visibility of the
radar image
[ENH Level3] Enhances the radar echo by 3 levels in the vertical
and horizontal directions of the screen.
Detect small targets such
as buoys
[Setting points]
When [ENH Level3] is selected, sea clutter and rain/snow clutter are apt to be enlarged. To use,
suppress images of sea clutter and rain/snow clutter using the [Sea] (sea clutter adjustment) slider and
the [Rain] (rain/snow clutter adjustment) slider.
In general, [ENH Level1] or [ENH Level2] should be selected.
Radar signal processing setting button