JRC JMR-7230-S - Displaying a Chart by Inputting a Position

13-7 Section 13 Operating a Chart (option)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
13.3 Displaying a Chart by Inputting a
Position
By inputting a position, the chart of the position that was input can be displayed.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed
2 Click on the [Chart] - [Off Center by Entering Position] on the menu.
The [Off Center by Entering Position] dialog box appears.
3 Enter a position of the chart to be displayed in the latitude/longitude input box.
4 Click on the [Jump to the Following Position] button.
The chart of the specified position is displayed.
Latitude/longitude input box