JRC JMR-7230-S - Comparing the Data between the Planned Route and the Actual Route

Section 10 Route Monitoring 10-18
10.5 Comparing the Data between the
Planned Route and the Actual Route
The [Pair of data] dialog box enables comparison of data between the planned route and the actual
route.
Use the following procedure as below to open the [Pair of data] dialog box.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on the [Route Monitoring] button on the menu.
The [Route Monitoring] dialog box appears.
3 Click on the [Pair of data] button.
The [Pair of data] dialog box appears.
Planned data is displayed in [Plan] (route plan) and the actual route data is displayed in
[Actual] (actual route) in the dialog.
[1] Planned course
Displays a planned course.
[2] Planned ship's speed
Displays a planned ship’s speed.
[3] Planned turn radius
Displays a planned turn radius.
[4] Planned ETA
Displays a planned expected time of arrival.
[5] Actual ship’s heading
Displays an actual ship’s heading.
[5]
[6]
[7]
[8]
[1]
[2]
[3]
[4]