Section 10 Route Monitoring 10-6
[2] To WPT information
The To WPT information that was selected in the [Route Monitoring] dialog box is displayed.
[a] [To WPT] (To WPT number)
Displays a To WPT number.
[b)] [BWW] (Angle of own ship - To WPT)
Displays a bearing between the WPTs (To WPT bearing from the previous To WPT).
[c] [DWOL] (Distance of own ship - To WPT)
Displays the distance between own ship and To WPT.
[d] [TWOL] (Expected traveling time)
Displays an expected traveling time to reach the position indicated by To WPT.
[e] [ETA] (Expected time of arrival)
Displays the expected time of arrival at the position indicated by To WPT.
[f] Cross track direction
Displays a cross track direction of the own ship.
When the own ship is cross-tracked on the right side, [STBD] is displayed and when the own
ship is cross-tracked on the left side, [PORT] is displayed.
[g] Cross track distance
Displays a cross track distance of the own ship.
[h] Cross track distance unit switching button
Switches the display unit of a cross track distance. Whenever the button is clicked on, the
unit is switched to "m" or "NM".
[a]
[b]
[c]
[d]
[e]
[f] [g] [h]
To Next Page
Loading...
