Section 14 Creating a User Chart/ Updating a Chart Manually 14-40
4 Click on the position of the reference point.
The EBL/VRM marker that determines the 2
nd
point is displayed.
5 Place the EBL/VRM marker on the 2
nd
vertex and click the button.
A vertex is created on the position on which the button was clicked and the information is
reflected in the object property dialog box. (Refer to "14.2.8 Object property dialog box").
The EBL/VRM marker is reset to the EBL/VRM reference point cursor.
6 Adjust the parameters on the object property dialog box.
7 To create an object on another position continuously, repeat Steps 2 to 6.
2
nd
vertex
To Next Page
Loading...
