JRC JMR-7230-S - Page 536

Section 16 Setting up Screen View 16-14
The descriptions of settings are shown in the table below.
Display tab
Setting Item Description of Setting Setting Value
Own Track
Display
Switching on / off display of own ship's
track.
On：Turn on display
Off：Turn off display
Plot tab
Setting Item Description of Setting Setting Value
Track Type combo
box
Selecting type of own ship's track. Standard：Always selectable
Plot Color combo
box
Selecting the track color from the list. White、Gray、Amber、Magenta、
Blue、Cyan、Green、Yellow、Orange
、
Dark Red
Plot Interval
combo box
Selecting the track plot interval from the
list.
Off、3s、5s、10s、30s、1min、3min
、
5min、10min、30min、60min、1NM
、
3NM、5NM、10NM、0.1NM、0.2NM
、
0.3NM、0.5NM
Time Label check
box
Switching on / off display of Time Label
interval.
On：Check
Off：Uncheck
Interval combo
box
When Time Label is enabled, selecting
the Time Label interval from the list.
1min、3min、5min、10min、30min
、
60min、120min
Clear tab
Setting Item Description of Setting Setting Value
Track Color
combo box
Selecting and erasing the color of own
ship's track.
When you select a color, a confirmation
dialog will be displayed.
Press OK to execute erase.
All、White、Gray、Amber、Magenta
、
Blue、Cyan、Green、Yellow、Orange
、
Dark Red
Each tab
Setting Item Description of Setting Setting Value
File Load/Save
Shortcut
When you click the shortcut, the [File
Load / Save] screen of [
Tools]-[File
Manager]
is displayed.