Section 18 Setting up the Operation Mode 18-38
Extended
Navigational
Information
Set highlighted display of the
navigation alarm supplementary
information.
When the item is enabled, the
message is displayed with black
characters on the yellow background.
Enable: Check
Disable: Uncheck
[Display Filtering for
NAVTEX Messages]
button
When this button is clicked on, the
[Display Filtering for NAVTEX
Messages] dialog is opened.
For details, refer to “Displaying only
the NAVTEX messages that satisfy a
specific condition”.
-
Display Filtering for
NAVTEX Receiver］
button
When this button is clicked on, the
[Display Filtering for NAVTEX
Receiver] dialog is opened.
For details, refer to “Receiving only
the NAVTEX messages that satisfy a
specific condition”.
Displaying only the NAVTEX messages that satisfy a specific condition
When the [Display Filtering for NAVTEX Messages] button is clicked on, the [Display Filtering for
NAVTEX Messages] dialog is displayed.
In this dialog, NAVTEX messages to be displayed can be filtered.
To Next Page
Loading...
