JRC JMR-7230-S - Page 650

Section 18 Setting up the Operation Mode 18-48
Setting item Setting contents Setting value
[Volume] tab
Key ACK Set the volume of the sound emitted when
the key is pressed.
Off
Level1(Soft)
Level2
Level3 [Default]
Level4(Loud)
Misoperation Set the volume of the operation error sound. Off
Level1(Soft)
Level2
Level3 [Default]
Level4(Loud)
Response/Notification Set the volume of the control response sound
to external equipment and control completion
notification sound (including the interswitch
control) from external equipment.
Off
Level1(Soft)
Level2
Level3 [Default]
Level4(Loud)
Message Notification Set the volume of the message notification
sound.
Off
Level1(Soft)
Level2
Level3 [Default]
Level4(Loud)
Alert Setting
Reminder
Set the volume of the sound notifying that the
alarm condition has not been set.
Off
Level1(Soft)
Level2
Level3 [Default]
Level4(Loud)
Alarm Set the volume of the alarm sound.
*1
Level4(Loud)
Warning
Set the volume of the warning sound.
*1
Level4(Loud)
[Melody] tab
Alarm
Set the melody of the alarm. Sound1
Sound2[Default]
Sound3
Sound4
Warning
Set up the melody of Warning.
Sound1
Sound2[Default]
Sound3
Sound4
*1 For these volumes, only Level 4 (Loud) is able to be selected.