JRC JMR-9230-S3 - Setting Route Display; Setting [Route] after Selecting [View] - [Options] on the Menu

9-3 Section 9 Route Planning
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.2 Setting Route Display
Before creating a route, set route display (display/hide of the route information to be displayed on the
screen) at route setting.
Use the following two dialogs for the setting.
9.2.1 Setting [Route] after selecting [View] -
[Options] on the menu
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on the [View] - [Options] - [Route] on the menu.
The "Route" setting screen is displayed.
Ship's speed
and distance
Arrival radius
Port side (red
line) and width
of port side
Starboard side (green
line) and width of
starboard side
WPT: Waypoint
Leg
Arrival circle