JRC JMR-9230-S3 - Planning a New Route by Graphic Editing

9-33 Section 9 Route Planning
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9.7 Planning a New Route by Graphic
Editing
Edit the navigation route according to the world geodetic system (WGS-84).
If you use the navigation route edited by a geodetic system other than the world
geodetic system, an accident may occur.
9.7.1 Graphic editing operation flow
9.7.1.1 Creating a new route file
1
Start [Route Planning].
Reference: "9.3.1 Starting the [Route Planning] dialog box"
2
Create a new route file.
Reference: "9.7.1.1 Creating a new route file".
3
Set WPTs from WPT0 to the WPT of the final destination on the chart
For the details, refer to the flowchart provided in "9.7.1.2 Editing a route file".
4
Save a route.
Reference: "9.5 Saving a Route"
5
End [Route Planning].
Reference: "9.3.2 Ending the [Route Planning] dialog box"