14-31 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
14.4 How to Use the Map Creation Tools
(At Manual Update of ARCS)
At chart manual update also, use the same map creation tools in the same way as that of user chart
creation. (Refer to "14.2 Using Map Creation Tools (User Chart Creation/Editing)"). However, there
are the following differences in the map creation tools
• The user chart information bar is not displayed.
• The object that is saved cannot be deleted by the eraser tool (can be hidden).
• A Mariner's Mark/Line drawing object cannot be selected with the drawing tool.
• More icon types can be selected in the drawing tool.
When the chart is updated manually, "Update" is displayed on the Write tool button.
Note
At chart manual update, the bearing reference mode is fixed to [N UP] mode.
14.4.1 Deleting or hiding an object
1 Click on the eraser tool button.
The cursor changes to the eraser cursor.
2 Place the eraser cursor on the object and click the button.
At manual update, only pre-saved objects can be deleted by the eraser tool.
If the saved object is clicked on with the eraser tool, the object is hidden. All the property screens of the
object that has been set to hide are displayed as disable and cannot be edited.
The object that is created and saved by manual update can be redisplayed unless deleted even if it is
hidden.
If the chart that uses the hidden object is updated, the expiration date of the object is set (90 days from
the date on which the object is created).
The object will be deleted after the expiration date.
To Next Page
Loading...
