JRC JMR-9230-S3 - Setting [Settings] - [Route] on the Menu

9-5 Section 9 Route Planning
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
[2] [Cross Track Limit Line]
When this item is selected, a cross track limit line is displayed.
When this item is selected, the line color can be set.
When [IALA-A] is clicked on, the starboard side is displayed in green and the port side is displayed in
red.
When [IALA-B] is clicked on, the starboard side is displayed in red and the port side is displayed in
green.
[3] [Show WPT Name](Show comment)
When this item is selected, a comment is displayed near the WPT.
When this item is selected, the character size of the comment can be set.
When [Standard] is clicked on, the comment is displayed in the standard character size.
When [Small] is clicked on, the comment is displayed in the character size smaller than the standard
size.
9.2.2 Setting [Settings] - [Route] on the menu
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on the [Settings] - [Route] on the menu.
The [Route] dialog is displayed.
[1] [Default] (Factory settings)
Set factory settings of the route display that is created at route planning.
[XTD (PORT)]:
Set a port side cross track limit.
[XTD (STBD)]:
Set a starboard side cross track limit.
[1]
[2]
[3]
[4]
[5]