JRC JMR-9230-S3 - Page 370

Section 13 Operating a Chart (option) 13-24
No. Item Operation/Condition Input range/Default value
6.
Start WPT
Name
[Operation]
Displays the following character string.
• Route filtered ENC update status report:
<Start WPT name>
*When no name is set, [WPT<WPT number>] is
displayed.
[Condition]
• ENC update status report:
No item is displayed.
7.
End WPT
Name
[Operation]
Displays the following character string.
• Route filtered ENC update status report:
<End WPT name>
*When no name is set, [WPT<WPT number>] is
displayed.
[Condition]
• ENC update status report:
No item is displayed.
8.
Start WPT
Positon
[Operation]
Displays the following character string.
・Route filtered ENC update status report:
<Latitude>, <Longitude>
*Latitude and longitude of the start WPT
Example: 57°46.5636’S, 11°58.0000’E
[Condition]
・ENC update status report:
No item is displayed.
9.
End WPT
Positon
[Operation]
Displays the following character string.
・Route filtered ENC update status report
<Latitude>, <Longitude>
*Latitude and longitude of the end WPT
Example: 54°20.0147’S , 10°09.3458’E
[Condition]
・ENC update status report:
No item is displayed.