Section 14 Creating a User Chart/ Updating a Chart Manually 14-122
(2) Displaying manual update history
The manual update editing contents are output to the update
log of the chart in text format.
1) Click the right mouse button on the chart and select [Cursor Pick…].
2) Select [Update log] on the [Pick Report] dialog box.The update editing contents are
displayed following <MANUAL> in text format.
Hint!
• The history indicates the difference between the unsaved information and the saved information.
For instance, when, in edit mode, [1] an object is added to the initial positon, [2] the object is moved,
and [3] the edited contents are saved, the history indicates the new addition to the last position to
which the object was moved.
• The latitude and longitude that are output to the history indicates only one coordinate point of the
edited line object or the area object. This does not indicate the coordinates of the vertex to which
the object was moved.
Select a history to be reviewed.
When a history to be reviewed is selected and
the OK button is clicked on, the dialog is
closed and the history is drawn.
To Next Page
Loading...
