16-3 Section 16 Setting up Screen View
16.1 Setting Chart Display Mode (Multi
View Mode) (ECDIS only)
In the [View-Multi View Mode] dialog box, chart display modes can be set.
16.1.1 Setting Multi-Screen
For details about how to use the multi-screen, refer to "8.10.1 Display of multi view."
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on [View] - [Multi View Mode] on the menu.
The [View-Multi View Mode] dialog box appears.
You can select a chart display mode from the following four modes.
• [Single View] Mode: Displays a chart in full screen.
• [Top-Bottom] Mode: Divides the screen into top and bottom sections; the same or
different charts can be displayed in two views of View 1 and
View 2.
• [Right-Left] Mode: Divides the screen into left and right sections; the same or
different charts can be displayed in two views of View 1 and
View 2.
• [Picture in Picture] Mode: Displays the chart in View 2 on top of the chart in View 1 as a
child dialog box.
1 Click on the icon of the chart display mode to be used.
A selection frame appears on the icon of the selected mode.
2 Click on the [Select Area from View1 for View2] button.
The button is highlighted.
3 On the chart in View 1, select an area you want to display in View 2.
The selected area is displayed in View 2.
To Next Page
Loading...
