Section 16 Setting up Screen View 16-10
Setting Item Description of Setting Setting Value
Interval (vector
time mark
interval)
Select a vector time mark interval from the pull-down
menu when Vector Time Mark is valid.
1 to 6 min
POS2 Symbol Selecting this enables to display the POS2 symbol.
Note
This item may not be displayed depending on the
equipment setting. The setting is not possible on the
RADAR screen.
To enable: Select.
To disable: Clear.
Shortcuts
Click on any of available shortcuts to display the related dialog box.
Shortcut Setup Dialog
Setting of AIS Filter [AIS Filter Setting] dialog box
Settings of AZ [AZ Setting] dialog box
Settings of Anti-Grounding Look-ahead [Anti-Grounding Look-ahead Setting] dialog box
To Next Page
Loading...
