JRC JMR-9230-S3 - Page 562

Section 16 Setting up Screen View 16-40
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
Chart Type Select a type of charts to be displayed
by click on the corresponding button.
S-57: Shows S-57 charts.
C-Map 3: Shows C-Map Ed3 charts.
S-57/C-Map 3
Text Size Drag the control on the slider and set
up the text size (7 levels).
Clicking on the [Def.] (factory
presetting) button resets the current
value to the default value.
0 to 6
Primary Chart INFO.
Set
*1
Select to enable to show Primary Chart
INFO. Set, and then select the items
you want to display.
To enable: Select.
To disable: Clear.
Display items
Coastline, Safety Contour,
Dangers To Navigation, Fixed and
Floating Aids to Navigation
Land Area Selecting this enables to display land
areas.
To enable: Select.
To disable: Clear.
Depth Contour Selecting this enables to display depth
contours.
To enable: Select.
To disable: Clear.
Scale Boundary Selecting this enables the display of
scale boundary.
To enable: Select.
To disable: Clear.
Sounding Selecting this enables the display of
sounding.
To enable: Select.
To disable: Clear.
Text Selecting this enables to display text. To enable: Select.
To disable: Clear.
Other Objects Select a display method of objects
other than land, depth contour and text
from the combo box.
Off: Hides other objects.
Base: Shows objects other than
the above which are
included in the display
category [Base].
Standard: Shows objects other than
the above which are
included in the display
category [Standard].
Off/Base, Standard