JRC JMR-9230-S3 - Page 565

16-43 Section 16 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Setting a Group Layer
When the [Group Layer] check box is set to ON in Page 2/3, the Viewing Layers are grouped.
The grouped lists are displayed under the main-sub layers.
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
Chart Type Select a type of charts to be displayed by clicking on the
corresponding button.
S-57: Shows S-57 charts.
C-Map 3: Shows C-Map Ed3 charts.
ARCS: Shows ARCS charts.
S-57, C-Map 3,
ARCS
Text Size Drag the control on the slider and set up the text size (7
levels).
Clicking on the [Def.] (
Factory settings) button resets the text
size to the factory preset value.
For the details of the examples of changing text size, refer to
"Example of changing text size".
0 to 6
Chart Load Select a display switching mode for the S-57 chart by clicking
on the button.
[AUTO]: Automatically switches and shows charts.
[Fix]: Fixes and shows the chart being currently displayed.
AUTO, Fix
Layer When showing S-57/C-MAP charts, select the objects you
want to display by selecting the check boxes of desired
objects.
Refer to "Contents
to be displayed as
layers".
Text When showing S-57/C-MAP charts, select the texts you want
to display by selecting the check boxes of desired texts.
Refer to "Contents
to be displayed as
texts".
[Group Layer] check box
Grouped lists