JRC JMR-9230-S3 - Page 612

Section 18 Setting up the Operation Mode 18-10
Setting Item Description of Setting Setting Value
Sea (sea clutter
adjustment)
You can switch between MAN and AUTO. MAN: Manually removes sea
clutters.
AUTO: Automatically removes
sea clutters.
Rain (rain/snow
clutter adjustment)
You can switch between MAN and AUTO. MAN: Manually removes
rain/snow clutters.
AUTO: Automatically removes
rain/snow clutters.
0.75 (0.75 to 1.5) NM Select a pulse with of 0.75 NM range. <Radar Antenna 10kW>
SP1/MP1
<Radar Antennas 25kW,
30kW>
SP1/MP1
<S-band solid state>
SP1/MP1
<X-band solid state>
SP1
1.5 (1.5 to 3) NM Select a pulse width of 1.5 NM range. <Radar Antenna 10kW>
SP1/MP1/MP2
<Radar Antennas 25kW,
30KW>
SP1/MP1/MP2/MP3
<S-band solid state>
SP1/MP1/MP2
<X-band solid state>
SP1/MP1
3 (3 to 6) NM Select a pulse width of 3 NM range. <Radar Antenna 10kW>
SP1/MP1/MP2/LP1
<Radar Antenna 25kW>
SP1/MP1/MP2/MP3/LP1
<Radar Antenna 30KW>
MP1/MP2/MP3/LP1
<S-band solid state>
SP1/MP1/MP2/LP1/LP2
<X-band solid state>
SP1/MP1/MP2
6 (6 to 12) NM Select a pulse width of 6 NM range. <Radar Antenna 10kW>
SP1/MP1/MP2/LP1/LP2
<Radar Antenna 25kW>
SP1/MP1/MP2/MP3/LP1/LP2
<Radar Antenna 30KW>
MP1/MP2/MP3/LP1/LP2
<S-band solid state>
MP1/MP2/LP1/LP2
<X-band solid state>
SP1/MP1/MP2/LP1